1 / 5
Low Profile 4x3 Raspeberry Pico (USB C) Macropad — image 1
1 / 5

Low Profile 4x3 Raspeberry Pico (USB C) Macropad

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the low profile macropad from @pulsar, adapted to work with a Rpi Pico clone board with an USB C connector

Rating
0 / 5
Likes
7
Downloads
9
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I enlarged the original model to acommodate a Rpi Pico board, added some reinforcements to the walls, extra posts and another screw post to keep the faceplate from bending outwards

It is recommended to use very thin wire like enameled wire and hot glue to secure the board and button as the fixing method from the original was removed, in my case I soldered that button to the bootsel button of the board to program the pico without opening it

Regarding the print, I used PETG and the tolerances for the switches ended up being a bit loose so I also secured them with hot glue, previously marking the areas with some paint over the posts (as it can be seen in the images), to avoid collision between the hot glue blobs and those said posts 

Now for the software (and wiring diagram), in this case I used KMK following this tutorial guide: https://www.instructables.com/Pico-Based-Number-Pad/

Tags