thread test | screw & nut | M10 & M20
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw and nut to test the printing accuracy
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 144
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw and nut in metric sizes M10 and M20.
tolerances
The nuts have a tolerance between 0.1 mm and 0.4 mm.
This allows for precise determination of the printer's accuracy and the required tolerance for thread design.
norms
The screw conforms to ISO 4014/4017 (DIN 933/931),
M10
Nominal diameter = 10mm
Thread pitch = 1,5mm
Wrench size = 16mm
M20
Nominal diameter = 20mm
Thread pitch = 2,5mm
Wrench size = 30mm
The nut conforms to ISO 4032 (DIN 934).
M10
Wrench size = 16mm
nut height = 8mm
M20
Wrench size = 30mm
nut hight = 16mm
--------------------
print settings
PETG
0.2mm layer
15% infill
no supports needed (depends on your print settings)