TTC450 PRO vacuum adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
800W spindle vacuum adaptor for CNC machine TTC450 PRO/Ultra
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
I made this model to fit the Two Trees vacuum system on the 800W spindle that came with the CNC machine, a TTC 450 PRO by Two Trees because unfortunately the stock one by Two Trees only fits smaller spindles.
I reused the LED bar from the original part, you are just gonna need to drill 3 very small holes (I drilled 1 mm holes) for the three front screws close to the USB plug and reuse 4 of the 6 magnets to hold the bottom part in place.
Unfortunately the short original brush need to be trimmed down a little in order to sit flush with the milling bit.
Printed with PLA with support material for the upper interface, 4 walls, 30% gyroid infill, 4 upper and bottom layers.
I added two holes for 4 mm diameter threaded inserts in order to use two screws to hold the adaptor in place on the spindle.