Gasket for model - TwistTop q-Tip Holder_users @Badger_SF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
28.3x1.6mm TPU gasket for the model of the author @Badger_SF
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 26
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
The model is perfect, I just added a seal.
The TPU seal adds more water resistance. I tested the water resistance of the printed model with 3 perimeters and the added seal for 8 hours submerged in water and the result was 100%.
Print TPU 95A Prusament
0,2mm structural
Perimeters: 5
Retraction length 1.6mm
Infill/perimeters overlap: 20%
First layer solid infill speed: 0
I printed the model on both a grainy and a smooth plate. The adhesion on the smooth plate is high, and according to the manufacturer Prusa, a separation layer is required on the printing plate.
