Qiyida X99 Xeon Open Air PC Case & Test Bench with ATX PSU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open frame PC case specifically engineered for the unique dimensions of Qiyida X99 motherboards with ATX PSU.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 51
- Makes
- 0
- Views
- 1,202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Overview
I designed this open-air chassis because I couldn't find a single model on the internet that fit my Qiyida X99 motherboard while remaining printable on a standard 220x220mm bed.
This motherboard uses non-standard dimensions (257mm x 189mm), making it longer than a standard mATX but narrower than a full ATX. This design bridges that gap, offering a sturdy, modular frame using 3D-printed corners and wood dowels.
Features
Small Bed Friendly: Fits on any 220x220mm printer (Ender 3, Prusa MK3/4, Bamboo A1/P1).
Hybrid Build: Uses 16mm (5/8") wood dowels for the frame to provide rigid support at a low cost.
Robust Mounting: Designed for 4.2mm brass heat-set inserts for secure motherboard and GPU mounting.
Universal PSU Support: Designed for standard PSUs (85x150mm faceplate); depth is unlimited due to the open-frame design.
Hardware Required
Wood Dowels (16mm / 5/8" diameter):
4x 365mm (Length)
4x 193mm (Width)
4x 194mm (Height/Vertical)
Fasteners: * Wood Screws: 20–25mm long (approx. 3.2mm thread diameter) to attach the PSU bracket and GPU support to the frame.
Inserts: 4.2mm Brass Heat-set inserts for motherboard and GPU bracket.
Adhesive: Clear glue is recommended for the corner joints to ensure maximum rigidity.
Print Settings
Printer Bed: Min. 220x220mm
Supports: [Add Yes/No based on your file]
Material Suggestion: PETG or ASA (due to proximity to heat-generating components).
⚠ Important Disclaimer
Please Note: This model is currently untested/experimental. I am awaiting my filament delivery to perform the first physical print.
Print at your own risk: There may be minor dimensional errors I have not yet identified.
Test Fit First: I strongly suggest test-fitting your components before final assembly or gluing.
Feedback Welcome: If you print this before I do, please leave a comment or a "Make" with your feedback so I can improve the design for the community!
Model Update – Printables (January 7, 2026)
Files 3, 10, and 11 have been updated.
• File 3: Reduced in size to save plastic while maintaining functionality.
• Files 10 and 11:
Model Update – Printables (January 9, 2026)
File 11 have been updated: modified to correct geometrical discrepancies.
Model Update – Printables (January 14, 2026)
File 5 have been updated: modified to correct geometrical discrepancies.
