1 / 2
Silicon Molds for 72 mm Gecko Wheels goBilda
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mold for pouring silicon to create Gecko Wheels for FIRST Tech Challenge from manufacturer goBilda.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
A two-part mold to recreate 72mm Gecko wheels. I recommend using 30A silicon or tougher to produce the same give and "consistency" of the wheels.
To pour:
Place the outer shell in the lip of the mold
Pour silicon into the mold
Cover the top with a small sheet of acrylic or polycarbonate
Remove mold, leaving the shell with the sheet
Let cure (follow silicon instructions for this)
Remove shell
Remove from sheet
Tada! You have a wheel