Extreem Printer Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extreme 3D torture test for overhangs, bridging, and bed adhesion. No supports allowed—push your printer to the limit!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Extreme 3D Printer Stress Test: "The Overhang Gauntlet"
This model is a compact but brutal "torture test" designed to evaluate a 3D printer's cooling efficiency and mechanical stability. It combines several high-difficulty geometries into a single print to identify the breaking point of your current hardware settings.
Key Testing Features
Extreme Horizontal Bridging: The long cylinder connecting the two main bodies tests the printer's ability to extrude plastic across open air without drooping or snapping.
Steep Angular Overhangs: The angled cylinders test the limits of your cooling fan. These "unsupported" pillars require precise layer stacking to prevent curling or "spaghetti" textures.
Minimal Bed Contact: The left section of the model relies on a very small surface area (footprint) relative to its height and complexity, testing the printer's bed adhesion and the stability of the Z-axis.
Cylindrical Precision: The vertical and horizontal cylinders check for "ringing" (ghosting) and roundness, ensuring the X and Y belts are properly tensioned.
Suggested Print Settings
Supports: None (Printing with supports defeats the purpose of the test).
Infill: 15–20%.
Layer Height: 0.2mm (standard) or 0.1mm (for high-detail testing).