1 / 4
Tool Case for Milwaukee Metric Tap and Die Set — image 1
1 / 4

Tool Case for Milwaukee Metric Tap and Die Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tool case for the 17-Piece Milwaukee Tool Metric Tap and Die Set

Rating
4 / 5
Likes
12
Downloads
83
Makes
0
Views
337
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

This is a case for the Milwaukee Tool 17-Piece Metric Tap and Die Set. I wanted to limit the tool layout to the smallest possible footprint while leaving room for accessing each of the tools / bits, which is why the M7 drill and tap are not stored in the same area as the other drills and taps.

The case prints in 3 pieces - the base, cover, and drill/tap holder. The cover snaps onto the base using tabs that slide into a recessed track. The base can also snap into the cover if inserted upside-down, which can help save space if you plan to keep this in a toolbox drawer most of the time.

The drill/tap holder is separated so it can print in the optimal layer direction to avoid weak points. Once printed, it slides into place in a designated cutout area. The fit is snug but not a press fit, so the insert should be relatively easily removable.

The drill and tap set is Milwaukee Model# 49-22-5601 available at Home Depot or other home improvement stores that sell Milwaukee Tools.

*I changed the cover design after the first test print to add access slots for a finger to pull the tabs away from the recessed track on the base. Without the access slots, it can be somewhat difficult to pull the cover off. The cover in the photos does not have the access slots.

Tags