1 / 2
Remixed HP Flex IO V1 Ethernet Mount for DFRobot Intel 2.5gig A+E card
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The DFRobot 2.5gig Intel i226 A+E card didn't quite fit the existing STL so I changed the dimensions slightly to fit.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used BHCS M3x8 bolts to affix the card to the print, and made the existing holes smaller so that the M3 bolts thread into them. Using BHCS bolts meant that the bracket for the top case retention screw has to be bent a little; this may not be necessary if you use wafer head bolts but I didn't have any handy.
I used this card: https://core-electronics.com.au/m2-ae-key-2-5g-ethernet-network-card-lattepanda-dfrobot.html