1 / 2
ADILS leg riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 26 mm high riser.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I needed to raise my Ikea tables about an inch (26 mm), which was at the maximum extension of the screw-in feet, leaving the tables extremely unstable. So I created this simple riser to cup the feet.
Because this is a practical print that will take some weight, I printed with 4 walls and 25% gyroid infill. After a couple of weeks, they are still holding up nicely for me.
The cups fit the legs fairly close. There is about 2 mm of wiggle room.