Ironing Coaster Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Wanted to create an ironing test that could be utilized beyond just the test itself to avoid being left with plastic scraps when done. This test print can double as a large drink coaster or keep it to use as a reference for your selected filament's ironing settings in the future.
The Ironing Coaster is 4"x4" and it includes Ironing Speed(mm/s) and Flow (%) settings in increments of 15 starting at 10 for a total of 49 different settings tested in the square. It takes just over 2 hours to print.
There is a reference text "O" on the underside to identify the corner that starts at 10% and 10mm/s. That way if you set it and forget it you can quickly identify your settings.
Edit: Added a smaller 3" version that tests 25 Settings in increments of 20. Prints in just under 1 hour 20 mins.
I hope this is useful for some folks out there, if you like it please give a like. Thanks and Happy Printing!