Mini-Z Short Course Truck 4WD | Mini SC24 | 1/24 RC Car (Free version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully printable and DIY RC car with no special equipment or CNC parts.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 117
- Makes
- 0
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Open Community License v1
Guide available here:
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the body is sct... :D
3 years ago I came up with an idea of a challenge, to make 99% printable small RC car to play with at home.
I spent now 20 days in row designing and printing every day prototypes to get to this point when I can say It is finished and someone can print it as well.
It is printable on Stock Bambulab P1S with no extra modifications and most of the parts are PLA/PETG. Didn't test it on other printer, but I expect it to be possible to print on anything precise enough with 0,4mm nozzle. Only for the power gearing and motor mount I used ABS-GF so it is temperature resistant, But it works even printed from PETG. Use Random seam orientation so the rotating parts won't be asymetrical.
This free version does not contain assembly guide. You can go to paid version with the guide.
You can find there also many extra parts from still ongoing development and updated main parts.
Paid version here:
https://www.printables.com/model/1535406-mini-z-short-course-truck-4wd-mini-sc24-124-rc-car
Here are necessary settings for slicer:
for all parts: seam orientation - random
Small TPU parts printing settings:
95A TPU
100% infill
0,2mm layer height
3 perimeters
Wheels TPU parts printing settings:
95A TPU
0% infill
0,2mm layer height
1 perimeter
4 bottom layers
4 top layers
Assembly parts:
PETG/PLA
100% infill
3 perimeters
0,16mm layers height
1mm XY separation for supports
Here is list of what you need for the assembly:
What tools you’ll need:
•Drill
•2mm drill bit
•4mm drill bit
•Steel file
•Sand paper (400 grid)
•Good comfortable screwdriver (as there are a lot of screws)
•Knife
•Tube Cutter
What hardware you’ll need:
•M2 screws
8pcs M2x4
10pcs M2x5
18pcs M2x6
10pcs M2x7
20pcs M2x8
6pcs M2x10
8pcs M2x16
•M3 Screws
6pcs M3x20
•Bearings:
1pc 4x9x4mm
4pcs 8x12x3,5mm
10pcs 3x7x3mm
2pcs 2x6x2mm or 2x6x2,5 or 2x6x3
•4mm brass or aluminum tube with 3mm inner diameter (170mm used length)
•Superglue (CA Glue)
•Silicone grease
•Steel spring wire (0,8mm suggested)
Here are some short videos of how it drives:
TBH I don't like the driving behaviour with the inrunner 1625 4800KV motor (but it was really cheap). The max speed will be probably higher, but the motor gets hot until the end of driving and there is not much torque for an offroad car. If you can, I would recommend to modify a 1404 or 1505 quadcopter motor with replacing the shaft for longer one, It has much more torque.
