Ikea Markus backrest angle fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed wedge to mount between the base and backrest assembly
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Some Ikea Markus batches seem to have the backrest mounting plate at a slight angle - this results in a slightly laid back position of the backrest even in the most upright setting. This wedge adds 4° of inclination to the backrest, tilting it a bit more forward and resulting in a more upright sitting position. It gets sandwiched between the base plate and the mounting plate, with the original mounting screws passing through it. No new/longer screws are needed.
I printed it flat on the bed with a high percentage (40%) of rectilinear infill to give the print more compressive strength.