Dragon-Themed Decorative Wand – One-Piece and Split 3MF Model Versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorative dragon-themed wand model. Includes one solid version and one oriented, split version as 3MF files. Split mode
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 192
- Makes
- 1
- Views
- 523
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
Short Description
This model represents a decorative wand with dragon-themed sculpted geometry and a continuous solid form.
Two 3MF files are included: a single-piece version with generic print settings and a second version that is oriented and split with optimized print settings.
Files Included
One-piece model (3MF)
Single solid model using generic print settings.Split and oriented model (3MF)
Model divided and pre-oriented, with optimized print settings applied.
Print Parameters (Suggested)
The following print settings are provided as a general recommendation and are not mandatory:
Material: PLA
Layer height: 0.15 mm
Infill: 15 %
A physical print test is shown using Prusa Woodfill PLA.
Usage Notes
The model is a static decorative object.
No moving parts are present.
No assembly hardware is specified.
Limitations / Notes
The model geometry was generated using AI based on an AI-generated reference image.
The design follows the generated geometry without manual functional optimization.
Disclaimer
This model and its description were generated using AI.