1 / 9
Reinforced EBB36 Mount with Protoxtruder 1.0, 2.0 with (Optional) Stealthchanger offset mounting — image 1
1 / 9

Reinforced EBB36 Mount with Protoxtruder 1.0, 2.0 with (Optional) Stealthchanger offset mounting

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the reinforced ebb36 board mount that works with or without stealthchanger for Protoxtruder 2.0, 1.0, stealth.

Rating
0 / 5
Likes
3
Downloads
23
Makes
0
Views
120
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I reinforced the mounting holes and structure of the mount, so that there is no EBB36 Wiggle when straining the strain relief. I did this by looking at the PCB components arrangement of the EBB36 1.2 and seeing where I could add more plastic, so it has only been tested on EBB36 V1.2. It also has extra plastic between the EBB mounting and the motor mounting so that more flex is isolated.

I also added a version that offsets 4.5mm more for Dragonburner with Stealth Changer

The strain relief angle is roughly 45 degrees but actually more like 42 degrees to get a more vertical strain relief when using it with the protoxtruder variants

Mounting hardware for EBB36 uses M3x8 Socket heads with M3 Hex nuts. 
For the bracket itself, you use the default metal stand-offs and M3x6 socket head (This comes with the EBB36)