Creality K2 Plus Heatbreak Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heatbreak Modification for Creality K2 Plus
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 105
- Makes
- 0
- Views
- 439
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This duct is an attempt to better guide the air along the heatbreak. It will help to cool down the heatbreak by a homeopathic dose of °C. Because i always want to see the extruder gear moving, i never use the original cover. Even if it fits, i wouldn't use both.
Printing
walls: 1
bottom shell layers: 4
layer height: 0.16mm
infill: 0%
support: yes (optionally enable: Ironing Support Interface)
minimum feature size: 80
Screws
2x M2x10
Material
PETG is recommended over PLA. PLA Its is near its limit and will look like so, but stay in that shape:
 |  |
|---|
Version 2.0 with added L-profile to prevent this bending should fix it for PLA.
See also FreeCad project file on GitHub: duct.FCStd.