1 / 3
Thermostatic Valve Caleffi 200 Series Adapter Radiator Valve 16
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to the "16" valve
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Printed in PETG. 2 wall loops. 2 top/bottom layers.
10% infill.
Don't make it too stiff, otherwise it won't fit into the radiator valve.
Create a 19 mm diameter, 16 mm high cylinder as a piston to connect the thermostat pin to the valve pin. Make sure it's fairly stiff (4 top/bottom layers and 50% infill), as PLA is easily compressed.
If the piston isn't tall enough to completely close the radiator valve, test it 1 mm to 2 mm at a time.