UAP v6 CHC XL / Goliath ECAS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ECAS for UAP v6 CHC_XL / Goliath Hotend
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 66
- Makes
- 0
- Views
- 581
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Smolboi's UAP Toolhead for Monolith with ECAS! This version is specific to Goliath / CHC_XL Hotends, with the CHC XL you will have to remove the MZE for this to work correctly otherwise the hotend tip is too far from the Beacon / Cartographer probe.
This toolhead is designed for running toolhead wires to the MCU.... !!! NOT FOR USE WITH TOOLHEAD BOARDS !!!
Additional info: make sure you have the correct drive gear, you want the clockwork 2 version as sherpa will not fit correctly, there are some that will however, that is up to you to find and source. Image attached to show the correct DIA of the drive gear base, its 8mm.
Whats Different?
1. 2510 Fan mount uses 4x M3 Heatserts and EZ print breakaway supports
2. Carriage Plate also has print in place breakaway supports
3. Everything orientated correctly
Printing Tips:
1. Use Supports! Tree Supports work best. (FOR DUCT)
2. 100% infill - Why? because CAD assumes the parts are solid, COM is found this way, therefore 100% infill.
Licensing maintained from Smolboi's printables page.