InSinkErator Kitchen Sink Basket Strainer Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
InSinkErator Kitchen Sink Basket Strainer Filter
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 104
- Makes
- 0
- Views
- 300
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom fit strainer basket for InSinkErator garbage disposals. It has been test fitted on two different models and appears that InSinkErator uses the same size housing (slightly larger than 86mm). You can always increase/decrease the model's dimensions to fit your specific drain.
I wanted a basket without a lip, so that bits would easily flow into the basket from the sink. This one is held up by the indent within the drain cylinder rather than needing a lip.
There are two designs. One has thinner walls and grate (1.5mm) the other thicker (2.5mm). I was using the thin one, but after pouring hot water onto it, it has deformed slightly. I am suggesting to use the thicker version with ABS filament. PETG held up for a while but did eventually deform.
*** Update, I've also added an additional version of the thicker model with a knob for easier grabbing.
Enjoy!
Jae