Macro lens adapter for Mileseey TR190i / TR256i
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Macro lens adapter for Mileseey TR190i / TR256i thermal imaging camera. To be used with D20 ZnSe lenses.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Idea behind the design was that adapter should sit tightly without usage of any magnets or screws, and the lens should not fall when adapter is installed or removed.
The adapter has an insert that fits into a groove and firmly holds the lens from falling out.
To be used with ZnSe lens with diameter of 20mm. I used F50.8 focal length.
The adapter might be a little bulky, but does it's job well. Printed with tree supports. If I were to improve the design further, I would remove some of the volume from the back of the adapter, so there's less supports to use.