Cutaway Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutaway lightsaber with magnetic panels
- Rating
- 0 / 5
- Likes
- 185
- Downloads
- 234
- Makes
- 0
- Views
- 2,936
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Forge your own saber and be an apprentice no longer!
This is a custom cutaway saber hilt I originally designed to print on the Form 2 SLA printer. It was designed as a bit of a torture test so some parts are pretty small/fine. I have since uploaded some simplified/thickened versions of parts to make them easier to print and for FDM printers.
The saber is designed to be glued together with the cutaway portions held in place via magnets. The saber can be lit up with your choice of LED - with a rechargeable battery system hidden in the pommel.
See the includes PDFs for Print Guide and Assembly.
I sometimes have electronics/hardware packs for the saber in my shop - https://charlesworthdynamics.etsy.com
WATCH Bill Doran of Punished Props and 3D Printing Nerd - Joel Telling - assemble and paint my saber.
https://www.punishedprops.com/2016/12/29/3d-printed-lightsabers/
See how to assemble the saber on Tested -
Watch how my cutaway saber was designed -
PHOTOS BY NORMAN CHAN