Prusa CORE One Door Handle Fastener (Hex Nut/Bolt Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fasteners for mounting Prusa CORE One door handle with M3 screw and nuts through existing holes in door and handle.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 222
- Makes
- 14
- Views
- 928
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Various styles of Prusa CORE One door handle fasteners designed to be small, discrete, and nonintrusive:
Block - Parallel edges
Flared - Angled edges
Round - Circular
You will need:
(2) M3nN nuts ***Update 2026/05/16 - after I found myself retightening a couple time, I am changing from M3n to Nylon Nut M3nN. Updates pictures TBA.***
(2) M3x10 or M3x12 screws preferably with round/Torx heads. M3x10 or M3x12 will work if there is no foam tape between the door and handle. Use M3x12 if there is foam tape between the door and handle.
Before attaching to door, be sure to pull nut all the way through the fastener with a screw and then remove screw:
***Update 2026/05/16 - after I found myself retightening a couple time, I am changing from M3n to Nylon Nut M3nN. Updates pictures TBA.***