Soyuz Numpad "Flipper" Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A numpad to compliment my Quefrency "Flipper" case design. Uses Soyuz PCB and plate
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 866
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A numpad to compliment my Quefrency design.
I used the PCB and plate from the Soyuz numpad kit, but you can could create your own num-pad plate and handwire it.
I also include a “linker” that sits under either side of the Quefrency case I made here and allows for the attachment of the numpad to it for a seamless look. The longer side goes under the the numpad while the shorter under the Quefrency.
Like with the original case, you can print flippers for the side as an accent.
I also include the combined model if you want to print as one piece. I printed each piece separate and screwed it all together and it turned out very clean. You will need M2 screws (6 M2x20mm for the sides and 4 M2x5 or 4mm to mount the plate)