Cute Relaxing Duck – No AMS needed! Snap fit!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cute, relaxing duck model designed to bring a little calm and charm to your desk or shelf. No AMS needed - snap fit!
- Rating
- 0 / 5
- Likes
- 83
- Downloads
- 255
- Makes
- 0
- Views
- 850
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This Cute Relaxing Duck is a simple but expressive model made to look calm, cozy, and friendly. The design focuses on smooth shapes and clean details, making it both fun to print and great to display.
The model is provided in multiple files so it can be printed with or without an AMS. Please read the print instructions carefully—especially if you are printing without AMS—to ensure a good result.
Size: Model is about 70mm long (2,5 Inches) - do not resize because of snap-fit design.
Print Instructions
With AMS
If you have an AMS, simply use the provided AMS 3MF file.
Load your filaments, slice, and print — no extra steps needed.
Without AMS (No AMS needed!)
Two separate prints are required:
1) White body
I strongly recommend using the settings from the shared 3MF file.
Especially important:
Nozzle: 0.4 mm
Layer height: 0.2 mm
Supports: Yes (25°)
Brim: Not needed for me, but this depends on your filament’s bed adhesion
2) Yellow parts
I strongly recommend using exactly (!) the settings from the shared 3MF file.
The following are critical:
Orientation
Layer height
Rafts
Supports
These parts are small and delicate—changing settings may cause print failures.
After printing
Snap the parts into place with a little force.
Do not mix up the feet :-)
Feedback
Please leave a comment and let me know how well it printed for you. Your feedback really helps me adjust and improve the model and print settings. 😊