1 / 6
Airflow control ring drainvac
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an airflow control ring for the telescopic hose of a Drainvac vacuum cleaner.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — NoDerivatives
This is an airflow control ring for the telescopic hose of a Drainvac vacuum cleaner. Outer diameter of the tube where the ring is installed: 32 mm.
Print settings:
material: PETG
layer height: 0.2 mm
nozzle: 0.4 mm
enable automatic supports
Assembly: After printing, slide the ring onto the tube and rotate it until the inner tab snaps into the cut‑out window in the tube.
Position the ring so that the thinner window wall (3 mm) faces the tube, then slide it onto the tube:
