JDS Atom Amp/DAC mount for Ikea Anfallare table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool less mount for the JDS Atom Amp with a Z clamp that fits the Ikea Anfallare 65 degree angled edge. Includes step.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a mounting bracket to attach my JDS Atom Amp to my Ikea Anfallare table. I did not want to stick or drill any holes / keep the installation tool less, and reversible.
I've used a Z clamp that while looks a little odd, ensure that the CG lies in-between the mounting arm. The interface between the clamp and mount is a low clearance fit but once slid in, should hold without the use of an adhesive.
It doesn't recess the DAC completely within the tables profile as I wanted it to sit out a little for easy access, but feel free to modify it. You could perhaps drop it a little and reinforce it if you'd like to add an additional DAC.
There is adequate clearance for cabling and connection, as well as to the dials and buttons. I recommend furniture pads for a snug mount, and for some isolation.
I've attached Step files, so have fun!
Printed with a Prusa Core One, 0.2mm nozzle, 4 perimeters, 15% infill gyroid, no supports, White Prusa PLA. The Mount prints on its base and the Z bracket on its side.