1 / 4
67 mm Hole Grommet for Desk cabling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inter sliding grommet to suit a 67 mm diameter hole which will adjust from 50 to 80 mm thickness.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Needed to put a largish hole in the side of a table to access the ethernet port on the wall (Table is hard up against the wall). This grommet neatens up the hole in the waffle board desk leg material. You should be able to scale it in the Prusa Slicer to adjust to the hole size you need ( I used 67mm as it was the largest hole saw I had at the time ) . The print is of 2 pieces, one slides into the other from either side of the hole. It has a slight friction fit so I didn't bother to glue it together.