Locking Bearing Based spirographic WDT Tool Bottom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative lower part for Kensei's Bearing Based spirographic WDT tool which firmly holds the portafilter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this mod to firmly, yet easily hold the portafilter in place so that the WDT tool doesn't want to tip over while you are spinning the top. I found that unless I was being very careful while using the WDT, the fact that it is top heavy (due to the bearings) and the handle is on the outside edge, the whole thing would want to tip over.
Now, with a slight twist, the tabs of the portafilter are held in place, keeping the whole WDT in place so you can more easily distribute those grounds. Excellent for those of us who have difficulty doing things in the morning before their first coffee. :)