1 / 2
Triple-slot Gridfinity holder for Someline crimpers (ferrule, Dupont, JST-XH) — image 1
1 / 2

Triple-slot Gridfinity holder for Someline crimpers (ferrule, Dupont, JST-XH)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Three-slot holder in a 2*5 Gridfinity bin for Someline crimping pliers; includes mirrored model.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

This holder fits 2 types of Someline crimping pliers:

  • 2 slots for the Someline 10A4 and/or 10A6 ferrule crimpers (4 jaws and 6 jaws, respectively).

  • 1 slot for the Someline 2350M terminal crimper for Dupont / NSR connectors and JST-XH connectors.

The holders are mirrored versions of each other, to fit your orientation preference. They are also 1mm wider than the original model (never published, it was a draft), to give space for the little leaflets Someline provides, which detail the proper way to crimp the various terminals (I like to keep those on hand).

Internally, the slots are stepped at the front, to raise the crimping head and keep the back as straight as possible. I modified the slots in this way because, as the original version were 3 slots simply cut into a Gridfinity bin (via negative parts), it would cause the heavier heads to dip down and raise the rear tip of the handle, which would catch on the IKEA Alex these are kept in.

Created a 2*5*6 solid bin with PerplexingLab's Gridfinity generator, then imported into Orca. First carved the necessary slots with negative parts, and exported that as a new STL; then imported the new model, and added 3 rectangular prisms to lift the crimping heads. Nothing particularly advanced, but I have yet to learn CAD.

Fitted with sliding openings for 6*2mm magnets.

My holder was printed with Sunlu HSPLA Oreo, at with a 0,4mm nozzle and a layer height of 0,24mm and 10% infill; no supports needed. Reduced to 2 the walls, top surfaces, and bottom surfaces, as this will just sit in a drawer.

Tags