1 / 1
Ikea Vidga curtain stop - in rail — image 1

Ikea Vidga curtain stop - in rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Curtain stop for the Ikea Vidga rail system at any position

Rating
5 / 5
Likes
1
Downloads
29
Makes
1
Views
234
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I installed a longer continuous section of Vidga rails across two windows and wanted to have a point in the center where I can attach the curtains for each window.

Thanks for @Blizz for the original model. I only cut off the endplate and simplified the internals for easier printing. The original design is made for injection molding and with 3d printing we can just use "solid" internals and have the sparse infill take care of material savings.

Use the M4 nut and set screw from one of the orginial end stops.

Printing

  • Print on the side and add supports for the eyelet, this way the perimeters are printed in a continuous line through the eyelet.

  • Perimiters: 4

  • Infill: 15%

  • Material: I used PETG for printing

Tags