Scan-Contraption for ShapeScan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple yet effectiv contraption to take good images for ShapeScan.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This model needs a bit of 3D-printing and lasercutting (or woodworking).
Also you need some PVC-Tubing.
The PVC-Tubing needs to be 20mm in diameter. The height can be as high as you like.
I chose 200mm since this was the perfect height for my phone-camera.
The dimensions are made for a Google Pixel 8 but other phones should fit as well (though the camera allignment migth not be good).
You need to print:
2x Bodenplatten_Halterung_link
2x Bodenplatten_Halterung_rechts
4x Oben-Eckhalter
The "TupeStoper"s only have the function to keep the PVC-Tubes from roling out the sides, if the contraption is packed-up.
For the "wood"-part you need to use the dxf-files.
From these you need one each.
Note: Either "Bodenrahmen" or "Bodeplatte" should be 3mm thick. If you make both with 5mm or 3mm thick material, the "Bodenplatten_Halterung" would not fit.