1 / 3
Gridfinity Baseplate for Ikea Alex drawer — image 1
1 / 3

Gridfinity Baseplate for Ikea Alex drawer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a grdifinity baseplate for Ikea Alex drawers. The model is split for printing on printers with 250*250mm bed.

Rating
0 / 5
Likes
11
Downloads
65
Makes
0
Views
514
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Introduction:
This is a 7*12.5 grifinity baseplate for Ikea Alex drawers with an interior size of 297*525mm. It was created using the Gridfinity generator by Perplexing Labs(https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/1).
The model is split up to fit printers with a 250*250mm bed. This baseplate has a grid size of 42mm, with a 42*21mm row at the back to use all available drawer space. It features spots for 14mm connector clips as well as indents for 6*2mm magnets.

Printing:
I printed the baseplate in 5yr old 3DJake PETG basic with a .4mm nozzle at .2mm layer height, with 2 wall loops and 15% gyroid infill on my AC Kobra S1. Total print time for the 4 build plates was around 12h. 

The finished print fits the drawer snuggly and doesn't wiggle around. 

Printing instructions: 
Either use the 'Ikea Alex Gridfinity baseplate' file and use 'split to objects' to arrange the parts over multiple plates or use the single files.
If using the single files print P1 and P2 twice.
If you choose to use the conncetor clips print the desired amount of those as well(26 are needed to fill all spots)

Tags