TSO Parallel Guide Parallax-Free Cursor / Indicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a parallax-free replacement for the metal cursor that comes with the TSO Parallel Guide system (Gen 1).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very difficult.
This aims to resolve this issue by providing a sloped cursor that makes contact with the ruler to negate the parallax as much as possible.
Depending on your printer and settings, you may need to do some light standing for the best fit possible, I have tried to make this in a way to minimize that.
The through hole that is used to attach it to the TSO stop block has been expanded for some extra adjustability.
Print settings:
Would recommend max infill to minimize any flex and allow you to fine tune the dimensions with a file/sand paper as needed.
I've only printed it with PLA, so feel free to experiment with other materials to control the sheen etc.
This is my first file that I've designed, any feedback is greatly appreciated.
If you want these in other formats, please let me know, figured STL is the easiest to deal with.