Mini Vapor 2026 Brushless Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All parts and some jigs needed to build a Mini Vapor in 2026
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
NEEDS to be printed with 0.2/0.25mm Nozzle!! I used ABS-GF not tested with other filaments but should be fine
all dimensions of the plane can be adjusted with different length of carbon rods
PARTS USED:
0702 23000kV VCI motor used
HQ 2inch Ultralight Prop
70-200mah Battery
2x 1.5g Spektrum servos
3CH Receiver
CARBON LENGTH:
1PCS 1.5mmx 200mm Carbon rod or tube for main body: Original length
2PCS 0.5mmx 300mm Carbon rod for each wing
1PCS 0.5mmx 500mm Carbon rod for Elevator, see pictures how to use the jig to assemble (First bend rudderhorn use a lighter to help with bending)
1PCS 0.5mmx 250mm Carbon rod for Rudder
The Jigs have guids for the other carbonrod legths