1 / 5
Canyon Ultimate SP0055 Garmin Varia Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this adapter you can mount your Garmin Varia to the seatpost of your Canyon Ultimate.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 122
- Makes
- 0
- Views
- 723
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Loosen the two screws from the base plate from the handlebar mount that comes shipped with your Garmin Edge
Place screw in the middle hole
Attach base plate to the 3d print
Attach/Screw onto your seatpost
I used the following print settings:
printed in ASA
0.4 nozzle
0.12 mm High Quality
Seam position: Back
3 Wall loops
Embedding the wall into the infill
30% infill, Gyroid filling pattern
with support for the middle hole
Use at your own risk. Remember that this mount has a single point of failure (the middle screw).