1 / 4
Ratrig Vcore 3 vcore 4 toolhead cover w/ knomi2 support — image 1
1 / 4

Ratrig Vcore 3 vcore 4 toolhead cover w/ knomi2 support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I designed this because I wanted a knomi 2 option and wanted to clean up the wiring

Rating
0 / 5
Likes
2
Downloads
17
Makes
0
Views
151
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is my first attempt at making a toolhead cover. I’ve printed it and confirmed it fits the Knomi 2 and toolhead perfectly, though it’s still untested for performance, so feedback is welcome.

I designed it with an optional feature to relocate the toolboard from behind the extruder to in front of it. It still mounts to the extruder but sits inside the toolhead for a cleaner look. I also added two zip tie anchors on the back for better wire management.

It’s compatible with either an EBB36 or the standard 42 toolboard, works with the Orbiter or Sherpa Mini extruder, and was designed around the CNC toolhead but also fits the standard one.

Before mounting the Knomi 2, make sure it’s connected to Wi-Fi and running, as the reset button won’t be accessible afterward.

To install, insert it through the back of the cover with the USB-C side down and the screen tilted back slightly. Once it clears the opening, tilt it forward so it sits flush against the front, then press in the Voron mounting plate, feeding the Wi-Fi antenna and power wires through before securing it.

Tags