Star Wars Jarek Yeager's Racer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of Jarek Yeager's Racer from Star Wars: Resistance with moving print-in-place wings
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 64
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution
This is the racer flown by Jarek Yeager in Star Wars: Resistance. The wings on this model are print-in-place and can move up and down.
Dimensions
Length | Width | Height | |
|---|---|---|---|
wings middle | 56.4mm | 41.6mm | 17.2mm |
wings down | 56.4.mm | 52.2mm | 15.4mm |
wings up | 56.4mm | 20.1mm | 27.5mm |
The version with pin is compatible with a small pin and base (link).
Print Instructions
Print either jarek yeager-print.stl (no pin) or jarek yeager-pin.stl (with pin, shown in photos).
Printed at 0.10mm layer height. Requires supports on buildplate.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#