Anti-Vibration Adapter Plates for PTZ Isolators

When mounting PTZ cameras of a well-known brand on a thin wall mount, I noticed a visible wobble/micro-shake in the video image whenever the camera moves (zooming, reframing, calling presets, etc.).
These adapter plates are meant to reduce that effect by creating a rigid interface and enabling the use of anti-vibration isolator feet between wall mount and camera.

Compatible with

• Proaim Anti-Vibration Isolator Mount for PTZ Cameras

How it works

You need 2 plates per camera:

• Lower plate: attaches to the Thin Profile Wall Mount

• Upper plate: attaches to the camera

The two plates are then connected using the hardware that comes with the Proaim isolator feet.
Typical assembly order:

1. Bolt the isolator feet to one plate

2. Attach that plate to the camera

3. Attach the second plate to the wall mount

4. Connect both plates via the isolator feet screws

Hardware required

• 2× M6 heat-set inserts (M6×6.8) for the lower plate
  (Alternatively, regular M6 nuts can be used.)

• 2× M6 screws to mount the lower plate to the wall mount

• 1× M6 screw to mount the camera to the upper plate

• Proaim isolator feet screws (included with the Proaim kit) to connect upper + lower plates

Printing notes

• Printed and tested in PLA

• Recommended for stiffness: 4+ walls and 30–40% infill
  (This is a functional mounting part.)

Disclaimer

Unofficial accessory — not affiliated with any brand. Please verify fit, screw lengths, and mounting security before using it in a permanent installation.