Ender THICCC Pro - Low Profile 9mm Belt Y-Axis Motor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low profile motor mount to fit bigger motors and not hit the bed carriage.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 37
- Makes
- 2
- Views
- 260
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a draft, uploaded per request. Please excuse the lack of information or if things just dont fit. I've been using this for 2 years without issue and never got around to adjusting or incorporating feedback. Fit and finish is not promised, you'll need to be creative, but the .stp is uploaded for anyone interested. Unfortunately, I have no plans on updating or modifying things so feel free to adopt, remix, and make it your own, I can't support the project.
Ender THICCC Pro - Low Profile 9mm Belt Y-Axis Motor Mount
Background:
Credit goes to the LH Stinger for many design inspirations. Motor mount was made to house an LDO 2405 motor for the Y-Axis. The stock motor mount results in the bed carriage hitting the motor and losing a lot of travel. This solution lowers the motor mount and allows 9mm belts because THICCCNESS. No other reason for 9mm other than i thought it looked cool (from the photo, you can see i never installed a 9mm belt).
Quick Notes:
-the parts are mirrored, so depending how you want them, make sure to flip them in the slicer.
-Part B need supports
Parts(ish):
-5mm idler
-5mm rod (or cut a M5 bolt)
-Short M5 bolts to attach to 4040 extrusion
-Optional bearing for double shear. I don't know the bearing size, but the dimensions of the hole 4mm deep x 11mm diameter. Don't quote me but i think its an MR115
-M3 heatset inserts where it makes sense
-M3 bolts
-Belt
Assembly:
-Install M3 heatsets where they make sense (Three on Part B, Two on Part A)
-Start the M5 bolts onto extrusion.
-Sandwich Part A and B together over the M5 bolts. (install double shear bearing if you have one)
-Install non-motor M3 bolts to assemble the motor mount halves together.
-Tighten the M5 bolts onto extrusion to attach the motor mount onto the extrusion. There's access holes from the rear.
-Smush in the 5mm rod with 5mm idler
-Feed the belt
-Install long M3 bolts to secure the motor. I can't remember but i think you have to pop off one of the motor drive gear guide plates and install the drive gear backwards.
-Install Y endstop with M3 bolts
