MUM5 Citrus Juicer Support (easier print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The citrus juicer of the Bosch MUM5 kitchen machine is attached in a way that puts high stress on the machine's arm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
The citrus juicer of the Bosch MUM5 kitchen machine is attached in a way that puts high stress on the machine's arm. This support locks into the mixing bowl slot.
Modified original model for easier printing. Print in whichever solid material you want, with basically whatever settings. It should be solid enough even with just 3 0.4 walls and minimal infill.
I printed in PETG with 3 0.6 walls, 0.3 layer height and 15% cross hatch infill.
The original model that this is based on was the catalyst that got me to buy my first 3d printer. A few years later, I finally printed it :D