Bracket for stable stacking of IKEA Uppdatera boxes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uppdatera boxes nest tightly inside one another. This bracket makes them stackable in a secure way.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 80
- Makes
- 0
- Views
- 286
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Update 2026/01/11 - I realised that more needs to be cut out to accommodate the feet for the smaller Uppdatera boxes. I've split this into a model for large (34 x 24 cm) and another for small (24 x 17 cm) Uppdatera boxes.
IKEA Uppdatera boxes nest tightly inside one another and cannot be used for dense storage. This bracket allows these boxes to be stacked in a secure and stable way. There are other models online for stacking the boxes, but these offer less stability.
The model was created in OpenSCAD and is fully parameterised. Change the outer_thickness (and optionally the outer_radius and tangent) to adjust tightness, but I find a PLA 0.2 mm 30% infill print at the current size holds firmly, while still being easily removed. High precision is probably unnecessary - an earlier version used a tangent calculated at double the correct amount, and the brackets still work well.
Use LargeUppdateraStackingBracket.stl for 34 x 24 cm boxes and SmallUppdateraStackingBracket.stl for 24 x 17 boxes.