Talon claw U bullpup raised rail handgaurd
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TCB in 2026?!!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix uses silly collet at the front and normal barrel screw at the back to fix the barrel.
Main section printed in 2 halves, connected with threaded rod tension and 2x 2mm locating pins up to 18mm in length, there is another 6mm pin hole between two models, i used a section of 6mm fiberglass rod as pin to strengthen the connection, though it is not required.
Support is required for RaisedRailFront.stl, do not generate supports in the holes, the image below shows the print orientation:

There are two more locating pin slots between magfront and muzzle, though not required.
Hardware needed:
2x 2mm pins (length ranging from 10mm to 18mm)
[Optional] two more pins from above
The .step is provided, so you can modify the models to use different diameter pins or adjust the hole tightness as you like.