1 / 2
1" hex ruler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ruler for hex grids
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A hex ruler for use with 1" hex grids (where the size is flat-to-flat). One side is for measuring the in the repeating direction (i.e. where the points are up/down, each gap is 1") the other for the alternating direction (i.e. where you go through an edge then the centre, where each gap is 1"/sin(60) )
I mostly made this to speed up drawing maps for Lancer on my dry-wipe map.
Settings
PLA
0.6mm nozzle, 0.3mm layer height
I'd recommend using something like sharpie to flood-fill the numbers then wipe the excess off the top to make them more readable.