magnet push/pull jenga block game
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Gives the ability to add magnets into the ends of jenga style blocks.
When playing with the magnet pusher stick the magnets will either pull the brick towards the stick or repel it away making the bricks a little less predictable.
In your slicer you will need to add a pause after the first few layers so that you can drop the magnets in, if using top magnets too you will need another a little before the end of the print. The orientation of the magnets can be either way, if you want them all to push/pull put them the same way.
The magnets I used are 6mmx3mm.
I'd recommend printing a 1 magnet brick or the pusher first and if you find they aren't fitting multiply the size of the print by 100.5-101% or 99-99.5% in either x+y or z as needed to improve the fit.