Table stand for stock Sovol SV08 spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lets you reuse and adapt the spool holder for filament or to hold 4" wide label stock for printers like the Epson Cm3500
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Since I use Polymaker boxes for my Sv08, the stock stand has been sitting useless on my bench. I made this stand to use it on bench, or as in my case, with an extension to use full rolls on the Epson CM3500 color label machine, which normally takes tiny 150 count rolls internally, but can be fed from the back with this stand with 3" core full size rolls using the rear port. They sell official spool feeders for this, but for nutty prices, and the SV08 holder is the right height.
The extension has a small ring to ride it, and I printed that from PC for its "slickness".
The stand adapter (2 sizes for filament or labels) takes a pair of M4 thread inserts, and uses an M3 screw through the base to attach to the nut on the SV08 stand. I made mine from Petg, but you do you.
Print with supports where necessary, I used about 5 walls for the label stand because of the additional weight of the roll.
(parts need scaling to metric if you dont work in inches, 2450%)