Sweetener Packet Holder - Portable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small container for holding a few sweetener packets.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 117
- Makes
- 2
- Views
- 789
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This small container holds 6 or 7 sweetener packets, and can be carried in a pocket, purse, or what-have-you. The lid is designed so that it stays attached to the holder, so it will not get misplaced. The lid is “hinged” in the middle to help maintain the compact and smooth overall shape.
To use, simply pull the lid up and rotate it out of the way.
To assemble, simply push the lid on from the side until the hinge parts snap into the slots on the bottom part. Note that the hinge sections are intentionally slightly bent inward; this provides some “pre-load” on the hinges and helps them to grip the bottom section more firmly.
Print Instructions
Print in PLA using the gcode or 3mf files provided; otherwise :
- perimeters = 4
- 0% infill
- print with top and bottom sides down as shown in the photos
As noted earlier, the two “hinge” parts of the top will print tilted inward - this is intentional.
CAD
The OnShape 3D CAD files for this are here :