1 / 3
FT EMS mounts for Chengliang P400W24V PSU — image 1
1 / 3

FT EMS mounts for Chengliang P400W24V PSU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounts to attach a Chengliang P400W24V to the FizzyTech EMS system

Rating
0 / 5
Likes
1
Downloads
16
Makes
0
Views
69
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The power supply that came with my Anycubic Mega SE is one of several variations of the Chengliang P400W24V, a 400W 24V power supply. Because I switched to dual-Z, I wanted to relocate it from it's stock location behind the gantry uprights to a position under the bed, but it's a thicc boi, coming in at 50mm tall (the bottom extrusions are 40mm, and I'm already losing ~6mm to the EMS; if not for the feet I added, there'd be no hope of fitting it under there). So, rather than mounting it from the top like normal, I've used brackets to mount it flush to the EMS backer from the sides.

There are a lot of different configurations of the P400W24V's chassis, but most of them seem to provide side attachments via a couple of different footprints (two screws one-over-the-other, and a single screw roughly in the middle). I've made brackets for both of those, such that they should position the EMS attachment rails over hexagon holes on both sides of the PSU.

Uses M4 screws to attach to the PSU, and the usual M3 screws (with or without the EMS bolts) for the EMS attachment.

Tags