1 / 3
Fractal Pop Mini Optical Drive Bezel — image 1
1 / 3

Fractal Pop Mini Optical Drive Bezel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement magnetic front cover for the Fractal Pop series cases with an opening for accessing optical drives.

Rating
5 / 5
Likes
1
Downloads
29
Makes
1
Views
176
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Fractal Pop series of PC cases has a unique quirk in the modern era:  A pair of 5 1/4" optical drive bays in the front of the PSU basement.  The hole for these is covered with a magnetic plate below the fans, and if you've actually installed drives in there, you have to remove that plate to access them.

This is a replacement drive bay cover with a big hole cut in the front so the drives are always accessible.  

I tested this on the Pop Mini Air (the mATX size) but it should also fit the Pop (ATX size).  I don't think it will fit a Pop XL.

Designed to be printed face down.

Difference in versions is the size of the opening, one is 1mm smaller in both directions to slightly overlap the drives and better cover the panel gap.

NOT tested with an optical drive in the top bay; the corner radius might interfere with the drawer.

Requires 2 6x3mm magnets.

Reverse engineered from Fractal's original part with calipers and FreeCAD.

Tags