C64 Ultimate / Elite 2 - Tape to User Port Adapter (2026 Version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Userport adapter that mounts onto the Tape port. For use with the C64U/UE2 User port expansion
- Rating
- 4.5 / 5
- Likes
- 15
- Downloads
- 100
- Makes
- 2
- Views
- 714
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look.
I would very much like to thank @FrankWL for providing me with the dimensions of the new User port PCB, and for helping me test this design and also for providing me with some excellent pictures to share! (https://www.printables.com/@FrankWL) (I will update the old images with the new ones a.s.a.p.)
Since I didn't have access to the new Machine and Adapter I hope that everything fits as intended. If anyone comes across any issues with this model then please report them to me. and I'll try to fix them if possible.
Other versions:
The version that allows access to the tape port can be found here: (working on it!)
The legacy version of this design (for earlier Ultimate models) can be found here: https://www.printables.com/model/749549-ultimate-64-tape-to-user-port-adapter
Print Settings:
Layer height: 0.2 mm
Perimeters: 3
Support: Only some support on the front of the User port base. (I used ‘paint on support’ + organic support)

Additional hardware required:
Most parts snap together, except for the optional lock bracket. If you want to use the bracket you'll need 2x M3 screws with a length of max. 7 mm. (M3x6mm)
Lock bracket:
For those of you who would like to tightly secure the enclosure to your case, I've added the option to mount a bracket on the inside of the case using 2 M3 screws. It can be a bit finicky to secure. Be very careful that you don't knock any components of your board!

Leg piece

The C64U case seems to be a bit higher then the original case, for this I created 2 additional leg pieces with different heights; one is 1.6 mm taller, the other 2 mm (compared to the original). Please report back to me which version fits best or please provide me with the correct dimension so I can adjust the model.
Assembly Instructions:
(Pictures are taken from the old design. Installation should be the same)

Insert User port Adapter and press down. Make sure it's flush with the bottom.
Guide the ribbon cable through the Tape connector opening.
(Make sure that the Tab on the connector aligns with the opening on the User port connector) Insert the connector
Attach the top cover. Make sure it is aligned correctly on all sides before applying force to press it down
Insert the support leg on the bottom
Attach the whole assembly to the Tape connector.

Optional Bracket installation:
