Universal Medal Display Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.90 – €1.10 net (excluding VAT)
For file: Medal_Holder_Insert_R38.5mm_0.4n_0.2mm_PLA_MINIIS_42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 41.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Medal Display Case: Two-part frame with a custom insert. Minimalist, easy to print, and perfect for any medal.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalist and functional two-piece stand to showcase your hard-earned medals.
Project Overview
This project is a modular display solution for sports medals. Unlike traditional wall hangers, this stand allows you to display your achievements on a desk, shelf, or trophy cabinet. It consists of a sturdy base and a custom-fitted frame that holds the medal securely while neatly hiding the ribbon behind it.
Features
Two-Part Design: Includes a Base Stand and a Medal Frame Insert.
Angle Display: The frame sits at a perfect viewing angle within the base.
Ribbon Management: The design allows you to tuck the ribbon behind the medal for a clean, professional look.
Easy Assembly: No glue required – the parts fit together via a precise slot system.
Print Settings
Material: PLA or PETG (Galaxy Black/Sparkle looks great).
Infill: 15-20% (Gyroid recommended for strength).
Supports: Not needed if printed in the correct orientation.
Layer Height: 0.2mm for a good balance of speed and detail.